Name: 3M adhesive Car Cable Clips support cable diameter within 5mm
Model: SM-CC01

 

Car Charger and USB cable Clips

Wire holder. 3M Cord clip. Sticky mounts. Sticky style clip. Management clip. Wiring clip

-Snap structure design can be easily disassembled. Fixed place of spring-wire design can be stuck wires. Makes no loose wires.
-Applicable wire diameter 5MM round wire inside the cord. Within and cable width 11.5MM, 2.5MM thickness within 

Instructions for use:
1. Bonding surfaces must be clean, dry
2. Optimum temperature range applications 21-36 ° C
3. If the temperature is below 10 ° C, it is recommended to make stickers with a hair dryer or a lighter after some warm-up stickers
4. Safety bonding time is after 24 hours

 

Features: stick design, eliminating the need for panel drilling hemp, torn release paper that is used. Long-term high temperature 104 degrees, short-term temperature 193 degrees.

*3M adhesive backing

*Material: PA(Nylon)

*Snap structure design can be easily disassembled. Fixed place of spring-wire design can be stuck wires. Makes no loose wires.


*Bonding strength with the sticky adhesive surface contact area with the increase of applied pressure to help stabilize the adhesive in contact with the sticky surface, thereby increasing the bonding strength.


*To achieve the best bonding results, the bonding surfaces must be clean, dry, tape application temperature range is the best 21-38 ℃, recommended if the initial bonding temperature is below 10 ℃, suitable for bonding, so the adhesive is too hard, and can not be firmly bonded to the object; However, if you have an adhesive on, and the holding temperature is also satisfactory tack.

 

Home|About us|Products|Shipping|Payment|Feedback|Contact us

Online Service

Close